Layering Your Wall-E MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.

Step 2:

Peel the white backing off the black Mickey with tracks decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the yellow robot body decal. Place the decal on the bottom half of the Mickey decal, lining up the bottom edges.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the grey robot body decal. Place it on the top half of the Mickey head, lining up the bottom edge with the top edge of the yellow decal.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the yellow eyes decal. Using the transfer tape, place it in the holes of the grey decal.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the grey eyes decal. Place it below in the middle of the yellow eyes.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the black eyes decal. Place it in the middle of the grey eyes.

Step 11:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!