For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut apart the red and white decals to make it easier to place them but leave the clear transfer tape on top of the decals.
Step 2:
Use the transfer tape to line up and place the green Mickey decal on the Mickey in the centre of your MagicBand. Press it down firmly. Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 3:
Place the black belt decal below the Mickey.
Step 4:
Remove the transfer tape.
Step 5:
Place the red pants below the black belt. Remove the transfer tape.
Step 6:
Place the gold belt buckle centred on top of the black belt.
Step 7:
Peel off the transfer tape.
Step 8:
Use the transfer tape to place the white trim of the hat at the top of the green Mickey as shown.
Step 9:
Peel off the transfer tape.
Step 10:
Use the transfer tape to place the red of the Santa hat. Peel off the tape.
Step 11:
Use the transfer tape to place the white ball at the end of the Santa hat. Press firmly. Peel off the tape. You're done!
