Layering Your Prince Phillip MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.

Step 2:

Peel the white backing off the brown Mickey decal. Using the clear transfer tape, place the Mickey head on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the sky blue circle decal. Place the decal on the head part of the Mickey.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the red cape decal. Place it so the sides match the edges of the Mickey and the shoulder piece drapes over the top of the blue circle.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the baby blue collar decal. Using the transfer tape, place it above the 'U' of the shoulder piece of the cape.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the black belt decal. Place it across the blue circle with the side edges matching the Mickey edges.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 12:

Peel the white backing off the yellow medallion & buckle decal. Place it so the buckle is in the middle of the belt and the medallion looks like it's hanging from the cape.

Step 13:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!