For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.
Step 2:
Peel the white backing off the green circular decal. Using the clear transfer tape, place the Mickey head on the MagicBand, with the flat side at the bottom.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the black ears decal. Place the decal on the ears of the MagicBand Mickey.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the yellow semi-circle decal. Place it on the bottom of the Mickey.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the blue sash decal. Using the transfer tape, place it on the Mickey, aligning it with the edge of the yellow piece.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the magenta sash decal. Place it in the middle of the blue sash.
Step 11:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 12:
Peel the white backing off the teal collar decal. Place it on the green part, aligning the bottom edge with the blue sash.
Step 13:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 14:
Peel the white backing off the pink flower decal. Place it on the ear.
Step 15:
Remove the transfer tape. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
Comments