Layering Your Moana MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. You will need to cut the leaf decals apart so you can place them seperately.

Step 2:

Peel the white backing off the orange Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the brown skirt decal. Place the decal on the bottom of the Mickey decal. Match the top corners of the skirt with the edges of the Mickey.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the tan skirt decal. Using the transfer tape, place it over the brown skirt decal. Line up the top of both skirts so the brown skirt peeks out at the bottom.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the orange top and belt decal. Using the transfer tape, place it so the belt lays at the top of the tan skirt. Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 9:

Peel the white paper backing off the pink flower decal. Using the transfer tape, place it on Mickey's ear.

Step 10:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!

For more decals like this one, check out TheMousierge shop on etsy!