Layering Your Mickey's Roadster MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.

Step 2:

Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey head on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the yellow fender decal. Place the decal on the bottom of the Mickey.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the red car body decal. Place it on top of the yellow decal, centered horizontally with the yellow decal.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the dark grey tires decal. Using the transfer tape, place them on either sides of the car.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the light grey decals. Place it so the Mickey is in the centre of the yellow decal and the other two are centered horizontally on the red part.

Step 11:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!