For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals.
Step 2:
Peel the white backing off the red Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the black belt decal. Place the decal on top of the Mickey decal, near the bottom, matching the edges of the belt with the sides of the Mickey.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the white beard decal. Using the transfer tape, place it so that the top corners touch the ears of the Mickey.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the brown hat decal. Using the transfer tape, place it at the top of the Mickey.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white paper backing off the yellow patch decal. Using the transfer tape, place it on the left ear.
Step 11:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 12:
Peel the white paper backing off the pink nose decal. Using the transfer tape, place it above the beard.
Step 13:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
Comments