Layering Your Flynn Rider MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.

Step 2:

Peel the white backing off the teal Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the white V collar decal. Place the decal on the Mickey decal, matching the top and inside edges to the teal Mickey.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the brown belt decal. Using the transfer tape, place it near the bottom of the teal Mickey.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the gold buckles decal. Using the transfer tape, place it over the white V, lining up the second stripe with the bottom of the white V. The belt buckle will align with the lower part of the belt.

Step 9:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!