For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.
Step 2:
Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey head on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the dark grey helmet decal. Place the decal on the face of the Mickey.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the black helmet details decal. Place it so the small ovals are at the bottom of the mask and the large black piece is at the top of helmet, between the ears.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the silver faceplate decal. Using the transfer tape, place it on the face of the mask, surrounding the black visor.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the red helmet details decal. Place it so the red stripe runs down the middle of black piece at the top of the helmet and the nose piece fits in the opening of the silver faceplate.
Step 11:
Remove the transfer tape. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
