For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.
Step 2:
Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey head on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the red bandana & eyepatch decal. Place the decal at the top of Mickey's head.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the matte gold earring decal. Place it on the right ear.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the dark red bow decal. Using the transfer tape, place it so the centre of the bow is on the knot of the bandana. You can turn the decal to whichever angle you think the bow looks best.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the rmatte silver swords decal. Place it under the Mickey.
Step 11:
Remove the transfer tape. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
