For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.
Step 2:
Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the purple dress decal. Place the decal on the bottom of the Mickey decal.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the white collar decal. Using the transfer tape, place it on the Mickey decal, above the dress decal.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the gold crown & necklace decal. Using the transfer tape, place it on the Mickey decal, lining the crown up with the top of the Mickey and the necklace under the collar.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the red jewel decal. Place it at the top of the necklace.
Step 11:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the white crown jewel decal. Place it at the top of the crown.
Step 11:
Remove the transfer tape. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
Comments