Layering Your Aladdin MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals.

Step 2:

Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the white pants decal. Place the decal at the bottom of the Mickey decal.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white backing off the brown belt decal. Place the decal above the white pants decal.Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 7:

Peel the white paper backing off the purple vest decal. Using the transfer tape, place it on the top of the Mickey, with the edges of the decal matching the edges of the Mickey.

Step 8:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 9:

Peel the white paper backing off the red hat decal. Using the transfer tape, place it at the top of the Mickey. There's a black piece of the Mickey decal to place it directly on top of.

Step 10:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!

For more decals like this one, check out TheMousierge shop on etsy!