Layering Your Woody MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut apart the yellow Mickey and yellow belt buckle decals.

Step 2:

Peel the white backing off the yellow Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the blue jeans decal. Place the decal on top of the Mickey decal.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the brown cowboy hat and belt decal. Using the transfer tape, place the belt on the top of the jeans decal and the hat at the top of the Mickey.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the white vest decal. Using the transfer tape, place it on the top of the Mickey.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white paper backing off the yellow belt buckle decal. Using the transfer tape, place it on the middle of the belt.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 12:

Peel the white paper backing off the black cowhide pattern decal. Using the transfer tape, place it on top of the vest pieces.

Step 13:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!

For more decals like this one, check out TheMousierge shop on etsy!