For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.
Step 2:
Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the brown roof & bumper decal. Place the decal on the Mickey decal so the top of the roof matches the top of the Mickey between his ears.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the copper hood decal. Using the transfer tape, place it on the Mickey decal between the brown pieces.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the grey headlights decal. Using the transfer tape, place it in the top corners of the copper hood decal.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the white eyes and teeth decal. Place it so that the eye piece fills in the space between the roof and hood and the teeth are in the mouth.
Step 11:
Remove the transfer tape. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
