Layering Your Tex MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.

Step 2:

Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the gold car decal. Place the decal on the Mickey decal, matching the edges at the top and side.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the silver grill & bumper. Using the transfer tape, place it at the bottom edge of the Mickey, leaving the tires exposed.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the white ears, windshield and headlights decal. Using the transfer tape, place it on the car decal. The ears will cover the black Mickey ears.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the brown cowhide decal. Place it above on the ears in the same position as the photo.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the tan bull horns decal. Place it at the top of the silver grill.

Step 11:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!