Layering Your Pua MagicBand Decal

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals.

Step 2:

Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the white Pua head decal. Place the decal on top of the Mickey decal, lining it up with the edges of the face.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the pink ears and nose decal. Using the transfer tape, place on top of the Mickey, lining it up with the edges of the white ears.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the grey patch decal. Using the transfer tape, place it above the nose on the left side.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white paper backing off the black eyes decal. Using the transfer tape, place it on the face, with the left eye in the grey patch.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!

For more decals like this one, check out TheMousierge shop on etsy!