For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut apart the red and white decals to make it easier to place them but leave the clear transfer tape on top of the decals.
Step 2:
Use the transfer tape to line up and place the gold Mickey decal on the Mickey in the centre of your MagicBand. Press it down firmly.
Step 3:
Remove the transfer tape. If the decal starts to lift off with it, press it back down.
Step 4:
Place the red skirt on top of the Mickey. You'll need to place it a little lower than in this image. You can reposition the decal a couple of times as long as you don't touch the sticky side with your fingers before pressing it down firmly.
Step 5:
Remove the transfer tape by gently peeling it back off the skirt decal. If the decal starts to lift off with it, press it back down.
Step 6:
Take the green belt and bow decal and place it above the skirt decal as shown. They will fit together like a puzzle. Press down firmly.
Step 7:
Peel off the transfer tape.
Step 8:
Use the transfer tape to place the white trim of the hat at the top of the gold Mickey as shown.
Step 9:
Peel off the transfer tape.
Step 10:
Use the transfer tape to place the red of the Santa hat. Peel off the tape.
Step 11:
Use the transfer tape to place the white ball at the end of the Santa hat. Press firmly. Peel off the tape. You're done!
Comentarios