Layering Your Minnie Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals.

Step 2:

Peel the white backing off the black Minnie silhouette decal. Using the clear transfer tape, place it on the on the MagicBand or the surface you're applying the decal to.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the beige face decal. Place the decal on the Minnie silhouette face. There will be a little of the black showing at the bottom and sides of the beige face.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the red bow decal. Using the transfer tape, place it on the bow area of the black silhouette, between the ears. The black will show at the top and sides of the bow.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the pink tongue decal. Using the transfer tape, place it at the bottom of the mouth.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white paper backing off the white eyes decal. Using the transfer tape, place them in the black eyes.

Step 11:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!