Layering Your Jessie MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the yellow belt buckle apart from the yellow ears decal.

Step 2:

Peel the white backing off the white Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the blue jeans decal. Place the decal on the bottom of the Mickey decal.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the brown belt decal. Using the transfer tape, place it on the Mickey decal, above the jeans decal.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

If you haven't done so already, use scissors to cut the yellow decal into two halves. Separate the ears decal from the belt buckle decal. Peel the white paper backing off the yellow ears decal. Using the transfer tape, place it on the Mickey decal, lining it up with the top of the Mickey.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the red hat decal. Place it at the top of the Mickey.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the yellow belt buckle decal. Place it at the top of the Mickey.

Step 11:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!