Layering Your Dale MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.

Step 2:

Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the brown Dale head decal. Place the decal on the Mickey decal.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the tan Dale face decal. Using the transfer tape, place it on the Mickey decal. There will be some brown peeking out at the bottom and sides.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off the white eyes and muzzle decal. Using the transfer tape, place it on the Dale face decal.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the black eyeballs decal. Place it on the white eyes.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Peel the white backing off the red nose decal. Place it at the top of the muzzle.

Step 11:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!