Layering Your Chip MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals.

Step 2:

Peel the white backing off the white Mickey decal. Using the clear transfer tape, place it on the Mickey head on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. Make sure you press down all the edges.

Step 4:

Peel the white backing off the gold rim, handle & base decal. Place the decal so the rim goes on an angle, covering the base of the left ear and stopping at the right ear. The chip in the rim should match with the chip in the white Mickey. The handle should be on the left side and the base should be on the right side at the bottom of Mickey.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off the light purple base decal. Using the transfer tape, place it in the middle of the gold base.

Step 7:

Remove the transfer tape. You're done!

For more decals like this one, check out TheMousierge shop on etsy!