Layering Your Tiki MagicBand Decal

Available at The Mousierge shop on etsy

For general Tips and Hacks to make layering decals simple, click here.

Step 1:

Clean your MagicBand with the alcohol wipe included with your decals. You will need to cut the leaf decals apart so you can place them seperately.

Step 2:

Peel the white backing off the brown Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.

Step 3:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 4:

Peel the white backing off the tan tiki Mickey face decal. Place the decal on top of the Mickey decal.

Step 5:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 6:

Peel the white paper backing off one of the green leaf decals. Using the transfer tape, place it over one of Mickey's ears.

Step 7:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 8:

Peel the white paper backing off another green leaf decal. Using the transfer tape, place it at the top of Mickey's ear.

Step 9:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 10:

Repeat the process with the third leaf decal.

Step 11:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.

Step 12:

And finish by placing the fourth leaf decal.

Step 13:

Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!

For more decals like this one, check out TheMousierge shop on etsy!