For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals.
Step 2:
Peel the white backing off the orange Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the yellow stripes decal. Place the decal on top of the Mickey decal, lining it up with the edges of the bottom.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the blue horns decal. Using the transfer tape, place on top of the Mickey, between the ears.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the red nose decal. Using the transfer tape, place it above the yellow stripes.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white paper backing off the tan whiskers decal. Using the transfer tape, place it on either side of the nose.
Step 11:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
