For general Tips and Hacks to make layering decals simple, click here.
Step 1:
Clean your MagicBand with the alcohol wipe included with your decals. Cut the white jewel apart from the white collar decal.
Step 2:
Peel the white backing off the black Mickey decal. Using the clear transfer tape, place the Mickey on the MagicBand.
Step 3:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 4:
Peel the white backing off the yellow hair decal. Place the decal on the Mickey decal, lining up the bottom edges.
Step 5:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 6:
Peel the white paper backing off the tan face & ears decal. Using the transfer tape, place it on the hair decal. The ears will match where there are peaks in the hair.
Step 7:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 8:
Peel the white paper backing off the black eyes decal. Using the transfer tape, place it on the face decal, leaving enough room for the eyeshadow decals to fit below the hairline.
Step 9:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the pink snout decal. Place it below the eyes.
Step 11:
Remove the transfer tape by peeling it off. If the decal starts to lift off, press it back down.
Step 10:
Peel the white backing off the blue eyeshadow decal. Place it at the top of the eyes, matching the edges.
Step 11:
Remove the transfer tape. You're done!
For more decals like this one, check out TheMousierge shop on etsy!
